Bryton Rider 30 Disassembly

After some recent wet weather and one of the rubber buttons on the Rider 30 wearing through, my Bryton started producing a strange sound and was working intermitantly. Additionally some of the glue had given way with the top cover able to be partially lifted. Given that the product is now out of warrenty and a quick search of the net didn't produce any disassembly instructions, it was time to see inside the Rider 30.

Because the cover had already given a little I used a wide flat bladed tool (butter knife) to prise the cover section. It looks as if the cover was attached using an adhesive along the ridge of the lower body section. This exposed the screen and a little rubber wedge (not shown in picture).

Flipping the screen out of the lower body section exposes the circuit board, three screws hold the circuit  board to the lower body, two on the lower and one on the right 3/4 of the way up (screws not shown). A small jewellers/electricians phillips screwdriver can remove the screws.

Finally flipping the circuit board, use care here as circuit boards shouldn't be directly handled, exposes the empty lower body section. On the backside of the circuit board you can see the battery and connector for your USB cable.

From here I removed all the moisture, removed small amounts of corrosion and gave the circuit board a clean with an evaporative product to leave no residue. I repaired the button using a malleable adhesive and plugged in the USB cable to see if the Bryton would work. Looks like the clean had done the trick. Take care in removing the USB cable at this point as the circuit board is not supported by the lower body section.
Putting the Rider 30 back together is just a reverse of the disassembly instructions, with the addition of applying some adhesive to the lower body section ridge before fitting the cover. Looks like this has worked in this case, good luck.

Gloves off on Grips

We selected five grips we have used in the last few years to give you our thoughts on them, and ffter riding on them hard you to see how well they have lasted. As with many things in cycling, grips can be a very personal choice and they can change the way a bike feels.

ODI Ruffian Lock-on. With over 5,000km on these grips we have become quite familiar with their characteristics. In the dry these thin profile grips are comfortable with or without gloves but in the wet the Ruffians can become slippery when not wearing gloves. We found they suited rides up to four or so hours.

ODI Yeti Chunky Lock-on. Another grip we have spent plenty of time with, ride with these and it is like having your hands massaged throughout the ride. They offer a ton of grip with their raised Yeti lettering, brilliant in all conditions.

Serfas Silicon. These grips may look new but have already been through the torture test of a 24hr solo. Their chunkiness forms slightly to your hand and provides suitable shock absorption throughout a ride. We also found that they remain grippy in the wet and without gloves.

JetBlack Lock-on "Scott 24 Edition". We gave these grips a fair shot but after numerous rides and races they just didn't offer what we wanted. Having said that these lock-ons could be suitable for your trail or casual rides.

ESI Chunky. Originally we tested the ESI Races-edge grips but found their lightweight nature not suitable for the riding we were doing. Moving to the Chunky versions we found the grips very comfortable even during extended rides. While they may wear with use and can tear easily the ESI Chunkys are a popular choice as they are light and secure without to much of a fuss.